About: jetskiworld

Watercross World - Asian Multi Sports & Entertainment Co., Ltd. in association with Thai Jet Sports Boating Association (TJSBA) and International Jet Sports Boating Association (IJSBA) would like to announce the official racing classification of Jet Ski King’s Cup - World Cup Grand Prix 2010 which will be held during 1 - 5 December 2010 at Ratchanok Park (fresh water), Pitsanulok Province, Thailand. With a good cooperation with Pitsanulok Province, Ratchanok Park which covers more than 2,500 Rai (4 million square meters) will be “the perfect venue” for this year’s World Cup Grand Prix, which aims to set the world’s record on the East as it is moving on strongly towards its 15th year. For this occasion, you will also have a chance to explore the north of Thailand such as Sukhothai, Petchaboon, Nan, and Chiangmai provinces which is full of the region’s charm, history, archaeological sites, cultures and gentle people.

With 21 competitors the starting line was filled up. Next to the defending World Champion Kevin Reiterer (AUT), there were many good riders on the starting line such as, Max Van der Valk (NED), Markus Erlach (AUT), Thomas Kete (SLO)... Despite a broken ligament only 14 days ago, Kevin Reiterer could finish in both motos first, because of a knee feminine support and a fighter will. Read the complete report under the Features section.

It has been over 6 years that this particular web site, www.jetskiworld.gr, is on air trying to unite the pwc funs all over the world, to promote the sport and above all to bring the latest news from the pwc world to all funs. The goal is not easy since the amount of work is huge, the personnel limited and the cost to keep it running very high. We are happy that so many riders, aftermarket parts manufacturers, race teams, tuners and pwc manufacturers trust our work and effort and support us with one way or another. There are readers from 73 countries that regularly log in to this web site to get informed. The first top 10 counties on the list are: Greece, USA, Japan, Cyprus, France, Sweden, Spain, UK, Belgium and Cayman Islands. Thank you all fro your support and we expect to receive any comments, suggestions and news from all of you out there. Every year we set new goals and we do out best to achieve them.

Samba is trying hard to emerge in the pwc scene. Designed by the Silveira Group, the Green Samba offers a unique take on electric personal watercraft. It’s not a typical runabout or a stand-up craft. The Green Samba is unique in the pilot is in a kneeling position. The breakthrough came when the focus was shifted from the motor to the propulsion system. Instead of a single propulsion unit, the Green Samba uses two propulsion pods, each with an electric motor contained within. This has proved to be a boon to the handling of the unit, as well as its efficiency. In fact, the company expects to get more than three hours of usage from a single charge. If that holds true it compares very favourably to a high-horsepower runabout. By the beginning of the fall the company will have all information available and a demonstration unit probably should be available for testing. The point Samba had already revealed this peculiar watercraft equipped with a 2T engine though it was never available for test ride not even when they first appeared at the World Finals in Havasu last year.

The most wanted pwc parts and accessories catalogue, the one and only that is made by Hot Products USA has already been completed and it already at Hot Products headquarters in San Diego. The 248 page catalogue is a result of hard work and countless hours spent for proper selection of goodies and design of the lay out on the computer. Mr Scott Saito, President of Hot Products USA informed us that the catalogue will be available very soon through Hot Products dealership.

R&D's Big Ass prop wrench takes the fight out of removing any tough to remove prop. Changing the prop at the beach without a vise is no problem. Also light enough to carry in your luggage while traveling to international races. The key is leverage. The 28” long wrenches are made from ½” plate aluminum and utilize an ID hex to get maximum bite without slipping on the prop tool. With these tools your prop changing headaches are over, guaranteed. Measure your existing spline tool and Solas or Skat-Trak prop tool and order the proper size wrenches. Pt. # 132-56001 Hex size .875” Fits Skat-Trak Prop Tool for Super Jet/Raider/Blaster, Pt. # 132-56002 Hex size .910” Fits Solas Shaft Spline Tool for Super Jet, Pt. # 132-56003 Hex size 1.000” Fits Skat-Trak Prop Tool for SHO/FZR/FZS/GPR/HO/FX/VX Fits R&D GPR/Super Jet Shaft Spline Tool (Pt. #132-55099), Pt. # 132-56004 Hex size 1.125” Fits R&D Shaft Spline Tool for SHO/FZR/FZS (Pt. # 132-55100), Pt. # 132-56005 Hex size 1.150” Fits Solas Shaft Spline Tool for GPR Pt. # 132-56006 Hex size 1.175” Fits Solas Tool 1.175”, Pt. # 132-56007 Hex size 1.415” Fits Solas Prop Tool for SHO/FZ. Suggested Retail price:$99.95