About: jetskiworld

The story of the day on Saturday was the weather and it was challenging to say the least. With water tempetures hovering near 48 degrees and rain the riders were tested on two fronts. However, there was enough action on the course to keep the fans excited. In the Pro Ski GP class Rick Sherker grabbed a quick holeshot and went wire to wire on his Jet Tribe, Bullet machine. Rob Flores had to overcome a dead engine start after jumping the gate but was able to battle through the pack to lock up second on his Hydro-Turf Rockstar Energy boat. Jim "Neutron"" Cebulski made his first appearance on tour and the privateer looked solid riding to a third place finish. James Bushell came roaring back on his BRP Sea Doo at the Grand Prix of Watercross to take a convincing win in the Pro Runabout Open class. Erminio Iantosca battled back and forth with Brian Baldwin with the Judge Motorsports Sea Doo riders landing in second and third respectively. The Pro Runabout Stock class saw two familiar faces up front again with Mountain Motorsports Kawasaki rider Eric Francis leading the way and Troy Snyder pursuing him doggedly aboard his Neptune Racing Judge Motorsports Hydro-Turf Sea Doo. They finished 1-2 with Brent Vanderley nailing down the final podium position on his Hydro-X tour Riva Racing Sea Doo. The Freestyle had the most difficult day but Jeremy Parr put together his best run of the year on his X-Scream boat and took his first win of the year. Johny Leftly looked very good as well working the amateur class to take top honors in that division."

88motorsport.fi has introduced a new steering pole for Kawasaki Ultra. It is adjustable in terms of height by 12cm and also in angle since you can bring it in different locked positions. It is a clever system that comes straight forward from the snowmobile features. Its unique adjustable feature makes it ideal for using it on a boat for Close Course and Offshore/Endurance racing. Sammy Pajalin owner of 88motorsport.fr used a prototype of this particular steering system on his Mad Croc Ultra that we tested in Greece while he in the country for his participation at the Akropolis Jet Raid. The steering system is already available from 88motorport.fi In the particular photo the adjustable steering pole is illustrated on it max height.

According to Christophe Girello of TechOneRacing, French rider Olivier Polo will soon be in Havasu in order to spend the summer in Arizona and make his preparation for the World Finals. Christophe will take care his 1200 SX-R. TechOneRacing has been helping many foreign riders the last few years on their preparation for Mark Hahn 300 and World Finals.

Multi World and National U.S. Champion Tera Laho has been sponsored by WWR Products and she has received a carbon/carbon SX-R spec 1 hull which will be prepared in order to enter Pro-AM GP Ski. The race craft will be prepared by Cristophe Girello of TechOneRacing. Laho pictured while testing Kommander Vector V-Drive hull which is made by Trinity Composites.

Weber based diagnostic software, drivers and connection cable is necessary to correctly diagnose potential problems, communication errors, synchronize TPS, and injectors with ECU, and many other functions. For Walbro ECU Only, this is not compatible with Bosch ECU. Available fromWeberpower.com for $240.53

The R&D Ultimate Sea-Doo Pump Seal was developed to end all frustrations and challenges trying to get Sea-Doo pumps properly sealed. The R&D Pump Seal creates a 100% positive seal without the use of silicone sealers. That’s right, no more silicone needed! The seal easily snaps onto the pump and assembles into the stock plastic mounting plate creating a solid seal between the mating surfaces. The new solid seal eliminates cavitation, and improves holeshots, hook up and acceleration. At R&D we have been working tirelessly on the 2012-2013 RXP-X 260 trying to get an impellor and pump package that will pull holeshots in Pro Stock Class competition. Until now that has been a tall order, as no prop seems to be perfect and no setup has proven to leave the starting line without cavitation. The R&D Pump Seal allows super quick impellor changes and pump re-installs for immediate operation and testing. The R&D Pump Seal allows impellor combinations that previously would not hook up and would not leave the starting line under hard acceleration without cavitation. Call R&D for your seal and get hooked up today. Features: • Installs super easy, fits the pump “better than stock” • Huge increase pump sealing without expensive sealers • Allows super fast Solas Impellors to finally be used without cavitation • Increases acceleration through eliminated cavitation • Aggressive holeshot and mid range acceleration • Installs directly into stock location • Fits all 4-TECH models ‘03+. Available from R&D with Pt. # 163-81500, Retail $29.95

Craig Warner has just released the new spec 1 SX-R hull which is made under his research and development. The new hull costs Retail $3,250 and you have to add the price of the hood $600 to pick it up all together. Additionally there is available a super light construction where hull and deck are made out of carbon fiber and the whole craft weighs 60-72 pounds and it costs $5,850. If anyone is interested he has to contact Craig Warner at WWRProducts.com (Craig@wwrproducts.com).