Category Archives: NEWS (ENG)

NEWS (ENG)

New arrival in Hot Products USA. The company has just received the shipment of Stainless Steel Valves from PRO-X. Part # 28.5594-1 Stainless Steel Exhaust Valve. and Part # 28.5594-2 Stainless Steel Intake Valve. These valves are for GTX-4-Tec 03-08, RXP/RXT 04-08, RXP-X 08. Call your nearest Hot Products dealer for pricing.

We tested the Tall Spring Tensioner of Kommander Ind. on a Limited SX-R which was previously equipped with a JSU (high) spring tensioner. The fact is that the particular tensioner provides exactly the same spring preload since they both share the same height of 3,1cm and the same tuner (Steve Webster). In terms of design it differs a lot and looks much simpler. We applied a load on it and we found out that a force of 14kg was needed in order to lift the spring from its rest surface. Using it on a stock SX-R pole makes it feel much lighter and mimimises the riders input on holding the pole. We also tested it on a Superstock SX-R that was equipped with an RRP pole and in this case we found out that it makes it far too light, a fact that reduces the feeling. It depends on the riding style of each rider whether he will use it on such application. The design is clear and nice and the black anodizing enhances the overall aesthetics. The rider who uses the stock pole will find it very usefull and it is a "good value for money" accessory. Kommander Ind Tall Spirnd Tensioner part# KOM-104-Tall is available through KommanderInd.com

Hydro-Turf released new Camouflage colors. Yellow Camouflage, Orange Camounflage, Blue Camouflage and Snow Camounflage. Those colors are already available for Hydro-Turf Mats. Those color mats are special order basis only and it may take 2-3weeks to get it after order confirmation. You can order hem through Hot Products USA.

The well known American impeller manufacturer has recently produce impellers for the Yamaha FZR and SHO. The impeller comes along with Nose Boot and Impeller wrench and the following pitch are available: SY557525SW1119 (11/19), Y557525SW1220 (12/20), SY557525SW1321 (13/21), SY557525SW1322 (13/22), SY557525SW1323 (13/23), SY557525SW1324 (13/24), SY557525SW1325 (13/25). All Skat-Trak impellers are available from Hot Products USA and its dealership network.

The particular pistons are made from Pro-X for Sea Doo four-stroke (Pistons are for Sea Doo RXP 04-09, RXT 05-09, RXP-X 08-09. Stabdard, 0.50mm and 1.00mm size are available.) and are available in the following sizes: No. 01.5594.00 Standard size, No. 01.5594.050 0.50mm Oversize, No. 01.5594.100 1.00mm Oversize. Hot Products USA has already got them in stock and are available though its dealership network.

For the past year we have seen lots of turbo set ups on Ultra’s, all of them bolt on a bench presented on Boat Shows, or other exhibitions. On the other hand we never had the opportunity to see one operating on the water. The first one we rode was completely made in Greece apart from its ignition which was supplied and programmed by the Australian Todd Boaer (of Jetworx Marine) himself. Read the complete report under the Tests section.

Part# 113-95007 ProII Aquavein for SD RXP-X/RXT-X The new R&D Race Grate for Sea Doo X watercraft is designed for closed course and offshore racing to deliver maximu hook up without compromising top speed. The new design compliments R&D Aquavein line up with a grate that is tailor made for rought water racing conditions. The new RXP-X/RXT-X Aquavein utilizes a deeper repositioned wing, deeper rails and a reconfigured rear chip area to deliver the added performance needed for racing condition. Now Hot Products has it in stock.