Category Archives: NEWS (ENG)

NEWS (ENG)

The destination is Koh Mat Sum, where voyagers can enjoy the magnificent scenery while having some sort of refreshments. After the short break, they head straight to Koh Tan, a superb spot where guests can snorkel and have fun saying hello to various kinds of fishes under the crystal clear water. Lunch will be in a picturesque coastal. You will be ushered to Koh Tan Restaurant. They serve delicious Thai foods, you will surely take delight on the terrific meal they will serve you. After you have eaten and relaxed, you can have a chance to walk around the Mangrove Forest. For the last stop, start and to to Koh Si Koh Ha, another secluded yet electrifying area. Explorers can rejuvenate and unwind while gazing on the beautiful panoramas. The cost includes: Hotel transfers, refreshments, lunch, T-shirt, Life jacket, snorkeling eauipment, personal accident insurance (not for jetski). Video movie of your day adventure in DVD format. During the entire cruise an assistant boat with a German captain goes along with all the voyagers. A camera man is also there to take shots of their extraordinary ocean adventure. The DVD will be delivered to the guests’ hotels the next day. Contact: Touck Siam Services Co.Ltd - 90/18 Moo 2 T. Bophut - Chaweng Beach - Koh Samui - 84320 Suratthani - THAILAND Tel : + 66 (0) 81 893 83 17- + 66 (0) 81 091 00 66 - Fax : + 66 (0) 77 413 461

Macc Racing had recently released a new billet aluminum cylinder head for Kawasaki SX-R. It is constructed by two parts and utilizes removable domes in order to adjust the cranking compression to the desirable level. It is equipped with o-rings in order to provide good sealing and to make periodic maintenance much easier. The upper part is anodized to prevent corrosion and also is specially sculptured to provide the right clearance for the blind nuts as well as to give a perfect fit to the Factory Pipe brackets.The particular cylinder head is manufactured in Japan from SE. Available from Macc Racing.

SE has got the answer. This is the new ride plate that promises to lift the top speed of Kawasaki Ultra 250X to a higher level. It is manufactured by casting and the double channels are deep enough to rise the nose of the craft to the required level, to minimize the drag and therefore, to increase the top speed of the craft. Although, the company has not announced officially yet how much the top speed is increased on a stock Ultra we are willing to find out for you.

It has not been revealed yet by Kawasaki though somebody else made a good effort on making one. Simply he put a stock Sea Doo (why on earth you want to put a Sea Doo engine in there in the first place?) three cylinder engine into the SX-R engine compartment. It looked quite good and there were people who found it an interesting project. On the other hand I do believe that somebody out there have already tried to fit a four-stroke Kawasaki 15F motor in there. That would be a challenge… or even better if you remove one or two cylinders and add a turbo…

We’ve seen Tim Bushman owner of TBM Racing and Mike Klippenstein having a chat quite a few times during the World Finals. Last year Klipper had modified on of TBM’s ride plate and used in the final motos in Pro Ski. Around August TBM released a Klipper replica ride plate for S4. Do you think that this cooperation may result in some other Klipper replica products?

Japanese company Craftman’s Movement has recently released an new rear seta for Kawasaki Ultra 250X. It is made of carbon, it’s lightweight and improves dramatically the airflow. Actually it helps the hot air from the engine compartment to escape easier and quicker, therefore there is more fresh air left to be used by the compressor. On the other hand it is not recommended for the passengers… It is available by Jetwave and Fennec Group.

This is the best selling Jet Launcher for Stand-Up Ski in Japan. Quick and easy to assembly and disassembly, that does not require any tools, either, no bolts and nuts. Just pull and push Hitch Pins and assembly and disassembly are completed within a few minutes. A special angle handle design makes it easy to launch and load a stand up (Ski) personal watercraft. Special needle bearings provide free movement to the wheels and less friction when it is loaded. The wheels are also made by Factory Zero under the best standards and their construction is a heavy duty one. Also, there is an ATV coupler kit (#JL258)by the option extra, too. Factory Zero is based in 348-13 Hongou Ebina, City Kanagawa 243-0417 Japan. Find more about it by logging to www.factory-zero.co.jp The pictured tote was used by Minoru Kanamori during the World Finals in Havasu.