Category Archives: NEWS (ENG)

NEWS (ENG)

R&D has developed an inexpensive foam engine insert that installs under the engines oil pan and takes up the tight space between the hull and oil pan. The gap between the engine pan and hull on the SX-R is very tight! Some areas are as tight as 0.250 (1/4 inch)! Small nuts or 6mm bolts that may get dropped or come loose for any reason can get under the engine and get trapped! Very difficult to find or remove! If left un-noticed, a fracture or small hole could get punched to the pan causing oil leakage, as well as hull damage! “Not Fun”! The R&D Foam Engine Insert will keep small hardware or debris from getting to these areas. The R&D Foam Insert is Chemical and Fuel Resistant, and can be cleaned with any degreaser cleaner and Re-Used just like a serviceable air filter. It is a must have part which helps to save your engine today. Pt. # 611-81499

The weight of the oem hood of the Kawasaki SX-R is 10.6kg which is quite heavy for a stand-up. Japanese company Technopro has already designed a lightweight version of it that weighs only 4.6kg and it made of carbon fiber. According to Tamotsu Yamada of Technopro the hood will also be available in fiberglass version. The price has not been established yet however it will be announced soon. Takahiro Tsijimoto of Ardath Inc. in the USA will be possible to distribute those hoods in the USA fairly soon. Technopro can be reached by e-mail at info@technopro.jp. Photo courtesy: Tamotsu Yamada

A lightweight rear seat unit has been developed and fabricated for the new Yamaha GP1800R from Rapid Racing of Juan Carlos and it is already available at the cost of $375.00 in primer finish and at $495.00 in painted version. It is a direct replacement unit. It features nicely designed air ducts that suck hot air out from the engine compartment. Superior finish and attention to every single detail has been taken. Contact Juan Carlos Santos on FB to order yours. Photo courtesy: J-C Santos

Now in Stock and ready for shipping. Hot Products 2017 preseason has arrived and now it is ready for immediate shipping: Factory Zero Jet Launcher Part# J-130S. For all standup watercraft (except the 2017 Kawasaki 1500SX-R). Factory Zero 2017 1500SX-R Jet Launcher Part# J-150S This Jet Launcher features a longer, wider and stronger frame with the addition of 2 smaller front wheels to accept the weight of the new 2017 1500SX-R. It is also in stock he Factory Zero Shop Stand with Part# J-203S.

Now Available. When the SeaDoo 300 series PWC were first released the spark plugs were a dealer only item and very expensive. NGK has now released the KR9C-G to Hot Products for aftermarket dealer sales. The part number is KR9C-G and is sold in boxes of 4 spark plugs per box. These plugs fit: 2016-2017 RXP-X 300, 2016-2017 RXT-X 300 2016-2017 and GTX LIMITED 300. Photo courtesy: Hot Products USA

The new Rule bilge pumps provide ultimate pumping performance, which helps keep your bilge clear of nuisance water, building on the genuine Rule design. The pumps are tested to the highest standard, achieving rated performance at 12 V vs 13,6V, resulting in higher flow with better efficiency for the toughest applications. The new designs includes: Higher flow, Built-in thermal cut-ff (provides added protection for pump and vessel), Back flow prevention 9reduces the amount of water left over the bilge), Hidden air vents in the body and threaded discharge. Contact Hot Products USA for further information regarding your specific application.

With spring fast approaching, it is time to think about extending your season..... These are made to order, can take 4 to 6 weeks. We don't like to be cold while riding, making the comfortable, lightweight drysuit a necessity for winter fun. Watcon brings the latest in Drysuits; combining the strength of lightweight nylon fabric, a deluxe watertight and airtight zipper with long life latex seals and waterproof booties.. Please specify size or contact us for a recommendation. It is made in the USA, it has a two year warranty and can be ordered in to custom colors and sizes. Contact WatCon for further details.