Leave everything else behind!
...
>Destination Greece: Akropolis Jet Raid 2017
>Belassi raises spec and price limit in Production Runabout
With the launch of a new Runabout in Linz, Austria which features new spec, high tech features, unseen until now finish even inside the engine compartment, luxury aesthetics and is powered by a turbocharged three-cylinder engine that produces 333hp at 8000rpm and ensures a top speed of 78mph. However, the luxury performance Runabout will cost 35000euro. Rumors say that the hull has been developed with the aid of IJSBA Pro Runabout world champion Gyorgy Kasza. Official release of the new boat will be presented at the Belassi web site on the 6th of April. Certainly this is a very interesting product however, it applies to a very small percentage of the global pwc market since the sky high price makes it almost unreal to the common users.
...
>R&D Pro Stock GP1800R set up as used on Klippers WINNING Ski
R&D Performance and Klipper Racing made a point last weekend at the first Round of the Jet Jam West Coast Jet Ski series where, Canadian Ace, Mike Klippenstein dominated in Pro Stock Runabout Class and he also won in Pro Runabout GP class by riding the same R&D tuned Pro Stock Class spec Yamaha GP1800R. Klippensteins ski was fine tuned by R&Ds engineer Bill Chapin according to Klippers riding style and needs. This is the parts list of R&D Pro Stock set up as it was used on Klippensteins boat: R&D GP1800 Sponson kit R&D GP1800 Scoop grate R&D GP1800 Ride Plate R&D GP1800 Pro Pitch Impellor R&D GP1800 Pro Stock ETS ECU R&D GP 1800 Pro Filter Kit Top Speed 82mph (In Race trim setup at 8650rpm) The boat can go over 82mph with ride plate shims removed (84-85mph)
...
>Riuss GP ski is made by Kasza
This is the hull that ex-multi National and World Champion, Nicolas Rius will use at the World Finals 2017 in GP Runabout class. The bottom is a Gyorgy Kasza hull that weighs 50kg and is made of carbon fiber (and costs 7000usd). Top deck is the new GP1800R heavily modified by Kasza which features low footwells and low centre of gravity. The engine bed is positioned as in Stock Yamaha. If you need to get a perfect handling Runabout hull you know who to ask for. Photo courtesy: Gyorgy Kasza
...
>Gasket Technology sponsors Lake Mishigan Surf Ride
I would like to welcome a New Sponsor to our Lake Michigan surf Ride, Gasket Technology Susan Chapman Koland. Thank you very much for your generous Donation to our event. Be sure to check out www.gaskettechnology.com for top quality gaskets. Accept no Substitutes.
...
>Networx Jetsports appreciation
Thank you for visiting us and participating at Networx Jetsports Ski and Boat Fun Run 2017 Mr. Tony Vo, the man behind Jettribe Racing USA and Mr. Jun Ikoma (Jetski Racer) and friends... More power to all of you!
...
>R&D will soon launch an OPEN CLASS Kit for the 1500 SX-R
When Kawasaki released the new Kawasaki 1500 SX-R almost a few days before the prestigious Mark Hahn 300 offshore race event, R&D was well prepared and launched many aftermarket parts in order to make it perform better in all terms. In Fact All of those parts that Botti/Maurin used to dominate the race, (rear sponsons, pole spring tensioner, air filter, hood hooks, ECU packages etc., were already available at the race site of Mark Hahn 300 last February. R&D is has announce that the company has been working extensively in order to produce a high performance Open kit for the Kawasaki. The kit will include, Aftermarket cams, race pistons and rings, reprogrammed ECU, fuel pressure regulator/fuel parts, cylinder head porting service, exhaust tuning parts, dual crank vent system, ignition relocator assembly, and drive line parts. Stay tuned to find more about these parts and accessories soon. Find updates here on a weekly basis!
...
