About: jetskiworld

Dustin Motzouris recently revealed to Jetskiworld.gr that Kommander Industries will built a KTM look alike version of the K1 with Orange/White assorted parts. Note the brand new K1 hood which has been lifted at the rear side. Simply by guessing an orange/black Blowsion handlepole will fit superbly not to mention other orange Blowsion and Kommander anodised parts. Way to go, Kommander.

The R&D “Dual Washer” Impeller Spacer Kit for Yamaha replaces the O.E.M. single seal washer with a specifically designed and machined kit that incorporates a second low friction slip washer to be used which allows impellers to be removed with 50 percent less torque during the impellor removal process! Tired of Impellers that are so galled up that impellers have to be machined or cut off? Tired of broken impeller tools and broken vises? Install the R&D low friction “Dual Washer” Kit and impeller removal will be super easy when making impeller changes. Many SVHO owners have had these issues and have had to cut up and throw away impellers and repair damaged threads. The R&D Kit puts to end all the expensive repairs and downtime with these issues. The R&D “Dual Washer” Kit fits all Yamaha models both supercharged and N.A. from 2008 and up! Pt# 132-81111 R&D “Dual Washer” Impellor Spacer Washer Kit $49.95

The R&D Ultra T1 Turbo System has been under serious development and testing for several years. R&D is excited to announce its immediate release. Each R&D T1 Turbo System is handcrafted by world class craftsmen to offer “Top Shelf” performance along with Bullet proof strong reliability. The R&D T1 Turbo System is a 100 percent complete and all-inclusive “bolt-on” system. Every aspect from design and build to engine management has been studied and perfected. The T1 Turbo offers tuned and tested reliable high performance on a recreational platform. The T1 is perfectly tuned to run on 91 octane pump gas and offers “on-the-fly” low and high boost settings. The two (user tuned and defined) boost settings are switch selectable between 10-16 lbs.. The T1 offers quick “lag-free” acceleration with a top speed range of 79-80 mph @ 15-16lbs. boost. Going with the R&D T1 Turbo System is a fantastic way to enjoy totally reliable and hassle free performance all day long. Order yours today. Uktra 310 R&D T1 Turbo kit: R&D/Borg Warner custom Turbo, Custom turbo mounting brackets, Stainless steal water-cooled In and Out pipes, Intercooler aluminum In-pipe, R&D Turbo Muffler Exhaust System, R&D T1 Filter Adaptor Tube (couples to oem air box), R&D Pro Tuned ECU file for the oem ECU (customer supplies ecu), Dual Boost Controller w/switch selector, R&D BOV Block-off Plate, All related oil lines, hardware, clamps, couplings, and hoses. Pt. # 101-00310 Retail $8000.00 Additional parts required: R&D 255 Fuel Pump Pt. #811-25256, R&D Rising Rate Fuel Pressure Regulator Pt. # 801-30000 (set fuel pressure to 57#), R&D Engine cooling Kit Pt. #660-82506, R&D Pro Pitch Prop 14/20 Pt. #131-31420

The R&D Racing “High Boost” Supercharger Pulley Wheel’s for the 300X/310X will clearly deliver an impressive boost in torque and overall horsepower. The R&D Pulley’s are designed and manufactured from high quality billet aluminum and precision hard anodized for superior belt wear resistance. The R&D Pulley’s are lighter than the O.E.M. steel pulley, and will delivers up to 4 lbs. of additional boost pressure. Expect up to 20-30 plus Horsepower gains (depending on Pulley choice). Holeshot acceleration performance is super impressive with a solid 1.5-2 boat lengths gain over stock and additional 2-4 MPH top speed gains over the stock pulley. Seriously Impressive results! The R&D Pulley’s are available in two boost ranges (RDP-16, and RDP-18). The RDP-16 will deliver 16 pounds of boost at 8000 RPM, and up to 16.5 at 8200. The R&D Pulley comes complete with all necessary hardware and installation instructions, as well as compatible parts upgrade suggestions and R&D ECU Program recommendations. R&D strongly recommends the install and use of the R&D Pulley Wheel Reprogrammed ECU Packages or the R&D Powershot Fuel Tuner when using the R&D Supercharger Wheel’s to have the proper AFR Calibrations. Not using the recommended ECU Package, R&D Powershot, or R&D High Volume Fuel Pump Kit’s with the R&D Supercharger Wheel can result in engine damage due to a lean air fuel ratio. Call R&D Today for tips and suggestions. • 4-5 MPH top speed improvement’s with more boost (depending on package) • Seriously noticeable acceleration performance improvements • Super easy to install • Uses O.E.M belt tensioner assembly • Significantly improved cornering with more engine torque • Drives through chop with superior power authority • Utilizes all oem engine internals Pt. # 611-30016 RDP-16 Supercharger Pulley Wheel/Ratio .970 to 1 (16-17 LBS Boost) $349.95 Pt. # 611-30018 RDP-18 Supercharger Pulley Wheel/Ratio 1.021 to 1 (18-19 LBS Boost) $349.95

The R&D Ultra 310X Speed-up Module was developed to override the ECU’s internal top speed limiting functions which are typically reduced 5-10 seconds after achieving a stable top speed reading value. Typically, the Kawasaki 310X can reach short top speeds of 68-69 MPH for about 5-10 seconds before being calculated and reduced back to 65 MPH, while still displaying 67 MPH on the dash! The R&D Module works to ELIMINATE these calculation and timer functions to allow “Full Speed Ahead”. Top speeds with the R&D Module installed are typically 70 MPH, making that a 4-5 MPH increase “Bolt On Part” on a stock Ultra 310X! The R&D Module also works effectively to display cruise and now wake mode speed values more accurately!

Force keeps on investing on fresh new ideas that will bring new riders to the sport of Jet Skiing. The illustrated electric powered Runabout its the company’s latest idea. Ideal for young enthusiasts to get familiar with the linear power delivery of the particular ski and try to control it in a safe manner in a small pool or supervised area on a lake. Force is the same company which has designed and fabricated the Freestyle/Freeride skis of world champion Ivan Potanin.

Canadian superstar and all weather motorsports sportsman Mike Klippenstein recently built a three-cylinder SX-R with a modified aftermarket hull. The engine set-up was done by Mike himself, it’s a 1200cc engine with mild porting and as Mike mentioned it is a very reliable set-up. It is a fast and reliable practice boat. He raced in Canada though and he did exceptionally well. He broke the engine during practice and then he got the hollshot 7 times in 8 motos. Bottom end, he won every moto on this boat. Klipper is already working on an EFI system. That would be a challenge. His modified aftermarket hull is very stable and predictable. Klipper is a very experienced rider and he knows very well what he is doing. Watch him at the up coming IJSBA World Finals.