Category Archives: NEWS (ENG)

NEWS (ENG)

The R&D GP 1800 SVHO Pro Copmp“Straight Shot” Filter Kit design will work re-route and straighten the airflow path to the supercharger giving the airflow path reduced restrictions. The GP 1800 has a noticeable amount of room and distance between the supercharger and the fuel tank over previous Yamaha models. “That said” R&D jumped at the chance to get to work and create a NEW DESIGN filter kit specifically for the GP 1800. The R&D GP 1800 Kit gets rid of the traditional 90 degree turns, as well as re-positions the filter mount to offer the “Straightest Shot” possible to supercharger. The new design will install quickly with zero modifications, and complies with the 2017 stock class rules! The kit delivers a noticeable increase in throttle response, more mid range pulling power, as well as increased RPM’s! The R&D Filter installs easily in 15 minutes, and can be quickly removed in 1 minute for those pesky clutch change outs! Available now, Pt. # 200-01807

The R&D Billet Adjustable Pump Cone Kit is a bolt on part designed to work with the SOLAS SVHO pump and oem Venturi nozzle. The R&D APC adds additional length over the Solas cone, and comes complete with tuning spacers. The extended length allows custom rpm tuning, reduced cavitation, and adds additional pump thrust. Precision tuning the pump cones length with the kit included cone spacers will enable you perfectly tune your pump for maximum thrust, superior holeshot, improved acceleration, and boosted top speed performance. Precision CNC machined from 6061 aluminum, anodized for corrosion resistance and o-ring sealed for leak free pump bearing protection. The R&D Cone Kit offers precise prop/rpm/nozzle tuning and higher top speeds. Now Available, Pt. # 162-18003 Retail $385.00

The R&D Cavitation Fighter Pump Sleeve eliminates the “square edge” transition between the transom plate (155mm id.) and the pump liner (160mm id). The Cav-Fighter Sleeve installs between the two stock parts to blueprint a ramp transition from the transom to the pump liner. When water gets pulled into the pump, the water boils (cavitates) as the impellor is only a half inch (.500”) from the square edge. Field testing confirmed by eliminating the square edge the Cav-Fighter Sleeve reduced cavitation on holeshot acceleration and in hard turns. The sleeve is machined from billet aluminum and anodized for corrosion resistance. Picture shows red anodized Cav-Fighter Sleeve and sleeve installed in the stock SVHO pump liner. Now available, Pt. # 132-80160 …Retail $99.95

If you are a service shop, or plan on doing a complete rebuild on your Weber MPE-750, then you might review the MP-01 "master puller". It will remove every component necessary to rebuild your MPE-750. Master Puller: This top quality "case-hardened" puller is specially designed for many different applications; it replaces the flywheel puller, countershaft gear & the snowmobile rotor clutch pullers on the Weber engine. It will also remove all Yamaha 61-X & 62-T twin cylinder flywheels, most Polaris watercraft & snowmobile flywheels and also Kawasaki JS-440,550&650. One year warranty from date of purchase. MP-01 $109.95

Fits all SuperJets pipes and adds up to 2mph in top speed. A simple tune-up kit that can be installed easily and increases back pressure. In the past R&D has made a similar part for the SX-R stock pipe which worked very well. Available from R&D already.

The famous Hot Products USA catalogue is on the make, however, the cover has already been designed and Frenchman multi national (France) and World Champion, Jean-Bruno Pastorello is featured on it. Last year Hot Products USA had announced in the rider’s meeting of Mark Hahn that the winner will make it to the cover. So the promise was kept and this is a preview of the front cover of 2017 catalogue.

The Japanese company who has pioneered the four-stroke SX-R project has recently revealed its new products regarding the brand new Kawasaki SX-R. SE Speedmagic is closely related with Kawasaki and it has made many remarkable accessories through the years. The price list of the parts will be announced soon.